After a discussion of the merits of different basting methods we set to work pin basting her quit (mainly chosen due to the tools available at the time rather than anything else!). We also discussed quilting designs and settled on straight lines approx 1/4" away from each seam line, so when basting we tried to make sure that all the pins were about an inch away from the seam lines so that she wouldn't have to remove them as she quilted.
We seriously over pinned (using nearly all my pins, which should be enough for a double sized quilt!), but better to be safe than sorry eh!
Then it was onto the quilting. We had decided the quilting should be about 1/4" away from the seamlines as it would be much more forgiving to a slight wiggle than trying to stitch in the ditch (ie along the seamline).
Our evening was interrupted by a trip to the pub for some goodbye drinks for a dear friend and colleague, so she didn't get as much done as we would have liked, but she did get about 1/3 of the quilting done before heading home.